A comprehensive survey on the methods of angle of attack measurement and estimation in UAVs

Angle of Attack (AOA) is a crucial parameter which directly affects the aerodynamic forces of an aircraft. The measurement of AOA is required to ensure a safe flight within its designed flight envelop. This paper intends to summarise a comprehensive survey on the measurement techniques and estimation methods for AOA, specifically in Unmanned Aerial Vehicle (UAV) applications. In the case of UAVs, weight constraint plays a major role as far as sensor suites are concerned. This results in selecting a suitable estimation method to extract AOA using the available data from the autopilot. The most feasible and widely employed AOA measurement technique is by using the Multi-Hole Probes (MHPs). The MHP measures the AOA regarding the pressure variations between the ports. Due to the importance of MHP in AOA measurement, the calibration methods for the MHP are also included in this paper. This paper discusses the AOA measurement using virtual AOA sensors, their importance and the operation.     

速率模式飞轮姿态控制系统飞轮组合平稳切换方法

对速率模式飞轮姿态控制系统的能控性、稳定性和飞轮组合切换过程进行了研究，揭示了在飞轮组合切换过程中引起卫星姿态抖动的原因，提出了通过对残余角动量进行卸载并将卸载函数同时前馈到系统输入的方法，以保持卫星姿态的稳定度。从理论上证明了可引入残余角动量进行卸载，将卸载函数同时前馈到系统输入，并且不改变原系统的能控性和稳定性。给出了某卫星飞轮切换应用实例，说明了飞轮组合平稳切换方法的有效性。     

Implementation of tactical maneuvers with maneuver libraries

This study creates and combines the general maneuver libraries for fixed-wing aircraft to implement tactical maneuvers. First, the generalized maneuver libraries are established by analyzing the characteristics of tactical maneuvers required in battlefields. The 7th order polynomial is applied to both the creation of the maneuver libraries and the generation of the trajectories or flight paths for modal inputs. To track the desired trajectory, we design the Attitude Command Attitude Hold (ACAH) system and the Rate Command Rate Hold (RCRH) system using Model Following Controller (MFC). Moreover, the Line-of-Sight (LOS) guidance law is designed. In particular, the CONDUIT® is employed to optimize the gains so that the control systems meet the aircraft Handling Qualities (HQ) criteria. Finally, flight simulations are performed for the longitudinal loop, immelmann-turn, and climb-slalom-descent maneuvers to verify that tactical aggressive maneuvers are realizable via the combination of maneuver libraries. This study can contribute to the development of flight techniques for aircraft tactical maneuvers and to the revision of air force operational manuals.     

基于变马赫数的五孔探针三维插值方法

探讨了五孔探针气动数据的插值方法,为提高插值精度,开发了基于传统线性插值法的三维线性插值法。该方法把同一探针在不同马赫数下的校准图形成三维数据库,将实验数据通过三维图进行插值。并使用改进前后的两种插值方法分别对校准风洞测得的数据进行整理,对比结果证明:在实验工况连续变化的情况下,三维线性插值法在插值精度上要优于传统线性插值法。特别是在来流马赫数变化较大时,该方法可以改善单一校准文件处理造成的数据精度问题,可用于自动化流场采集系统,为流场高速高精度采集奠定基础。     

原子时自动测量及数据采集系统

介绍了普通的时间实验室的时频测量,实现自动测量和数据收集的基本系统方案,并以上海天文台原子时实验室为例介绍了实际可行的自动测量和数据收集系统,这个系统高性能、低价格,可应用于国内几乎所有的时间实验室。     

高频大电压标准器

主要阐述了该标准器的基本原理,从理论上对结构补偿法进行了分析和数学推导,当R/Z_o=1.9～2.0之间时,具有最小的交直流差。设计了匹配的同轴热电转换标准器;进行了误差分析;给出了试验结果,说明该标准器交直流差的重复性和复现性是好的。     

普郎克定律的一个新推论

根据热辐射基本定律———普郎克定律,推导出了一个新的推论。即对于任意温度T的黑体辐射源,总存在一对应波长λδ,该波长对应的黑体单色辐射亮度对温度T的偏导数最大,且λδT =2 4 10 .3μm·K。这一结论对于单波长辐射温度计设计中探测器波段的选择有重要参考价值,根据此结论可以推出温度测量灵敏度最高的波长。     

高精度圆度仪误差分离装置研制及测量不确定度分析

介绍了一种由程控型多齿分度台和高精度圆度仪组合而成的全自动误差分离装置，该装置能够使圆度仪主轴回转误差从被测工件测量结果中可靠分离，从而极大地提高了圆度测量不确定度，本文对该装置测量不确定度进行了分析。     

激光外差干涉仪光电信号处理方法及特点

叙述和分析了外差激光干涉光电信号处理主其特点，指出了它们各自的应用范围，同时介绍了一处新型的光电信号处理方法，它不仅使外差干涉仪用于动态测量，而且可以同时实现高分辩率测量 。     

k-ε-g紊流燃烧模型数值研究

本文对k-ε-g紊流燃烧模型中模型系数C_R,C_(g1),C_(g2)的选定和计算浓度脉动均方值g的不同方法进行数值研究。计算结果表明模型系数值的选定直接与化学反应速率有关,而其中C_R影响最大。g的计算虽然可有不同方法,而其中微分方程求解最佳。并用实验数据来验证计算结果。